Showing posts with label Workshop in-floor Heating. Show all posts
Showing posts with label Workshop in-floor Heating. Show all posts

Tuesday, 6 January 2015

Geothermal Heating Pays Off for Local Chicken Farm

In 2006, The Hayter Group was approached by a Lambton County, Ontario chicken farm looking to double the size of their operation. They were operating a 32,000 square foot barn that was heated by a radiant in-floor system and natural gas fired boilers.

In Canada, the chicken you are serving for dinner was likely raised on a family farm. Chicks are shipped in large plastic trays, about 100 at a time. They arrive at a chicken barn and are placed on the concrete floor of the barn, which has been prepared with fresh bedding of clean shavings or straw.

Chicken barns are warmed up to almost 90°F when the chicks first arrive. Food and water is delivered through special bins that are within easy reach of the chicks. The barn is kept very warm for about a week. The barn temperature is then lowered by 2° to 3° per week as the birds begin to grow. Larger birds give off their own heat and start warming up the barn themselves.

As the chicks grow, the special feeding bins are raised higher for easy access. Chicks are able to roam freely throughout the barn. The feed is adjusted as the birds grow to be optimal for their development. Once the chickens are ready for market, the barn is completely cleaned and fresh bedding is put down for the next flock.

Chicken Barn Feeding System

The Lambton County farmer felt that he already had the best possible heating solution when he approached us about his expansion plans. The radiant heating system heats up the concrete slab, right where the chicks are. He was able to keep barn temperatures lower, because there was no need to heat the air above the chicks. The natural gas boilers were able to deliver the peak heat required for the first week and then could be adjusted downwards as the chicks grew.

The Hayter Group suggested a solution that had never been tried before. It made economic sense to use a geothermal system to heat the new barn. The system would require a larger up front investment, that would pay off over time in energy savings.

To produce 5 units of heat, a geothermal unit requires 1 unit of electrical input and 4 units from the earth (essentially free energy). The system would cost far less to run than paying to fuel a natural gas boiler.

The new geothermal system would heat both the existing barn and the new barn. We estimated that the geothermal system could provide 97% of the heat needed for the two barns. The existing boiler was integrated into the system to provide extra heat for the short period of time when the chicks are first introduced to their new home.

The installation was far larger than a typical residential geothermal system. Four WaterFurnace units were required along with two 120 gallon holding tanks. A 14,400 foot, 3/4” pipe loop was installed under existing farmland. The ground above the loop is still being used for crops.

This installation has attracted quite a bit of industry attention. In 2007, the farm owner received the Innovative Farmer of the Year Award. The operation also received The Premier’s Award of Agri-Food Excellence.

Eden Energy Equipment distributes WaterFurnace products in Ontario. They are featuring a case study of this installation on their web site. Farm journals from as far away as Africa have reported on the installation. Geothermal heating is now being used in all types of livestock operations around the world.

WaterFurnace Logo

The Hayter Group is currently one of Ontario’s largest geothermal dealers. We’ve developed several innovative green energy strategies, including geothermal and solar, that are paying off for our agri-business customers. Many farming operations are large volume businesses running on low operating margins. Controlling inputs like energy costs is an area where The Hayter Group can contribute to the success of our rural customers.

The Hayter Group

Chad Hayter

Tuesday, 14 October 2014

Heating the Workshop

Take a drive around South-Western Ontario to see the fall colours and you’ll also notice a lot of new buildings going up. Farmers are investing in their operations, building new barns, workshops and drive sheds.

The increase in propane costs has lead to a lot of questions about how to heat these buildings more efficiently. The choices available for most rural operations are propane, electric, oil, geothermal and wood.

It might surprise people to see wood as one of the choices. We have a company right here in Ontario that is manufacturing wood hybrid furnaces. The name of the company is Napoleon (you many know them for their barbeques) and they have a modern plant in Barrie, Ontario.

A wood hybrid furnace combines wood with a backup fuel source of either oil, electric, natural gas or propane. If you are away for a few days, or run out of wood on a cold night, the backup fuel source kicks in automatically.

Many farms have large wood lots, that always have lots of dead trees. People like to burn wood. It’s more labour intensive, but avoids large fuel bills in the winter when money is not always coming in.

The new Napoleon wood hybrid furnaces are highly efficient. The natural gas or propane furnace they are paired with run at 96% efficiency. Wood efficiency is more difficult to measure, because it varies with the type and quality of the firewood.

A consideration before installing a wood hybrid furnace is that it will require a long-term commitment. Studies have shown that after 3 years, the average Canadian finds they don’t have the time or inclination to continue cutting firewood.

The best way to deliver heat to a workshop is through in-floor tubes. The best time to install these is when you pour the floor for your new shop. In-floor heating is inexpensive to install during construction of a new shop. It leaves you with all sorts of options for what fuel to heat the shop with.

In-floor heating is more comfortable in a workshop. Shops normally have high ceilings. The heat is delivered at the floor, where it is needed. You feel more comfortable at lower temperature settings with in-floor heating. That also saves you on fuel costs.

Boilers can use wood, propane, natural gas, oil or almost any combination you decide. You can also install a geothermal system.

Geothermal systems are the most expensive to install, but the most cost-efficient to run over the life of the equipment. Geothermal is also the most environmentally friendly choice. Geothermal systems can use in-floor tubing or forced air duct work.

Revenue Canada helps soften the blow of installing geothermal with accelerated depreciation schedules. You can write-off 79% of the entire system in three years, and all within 5 years.

The Hayter Group specializes in rural service and installations. Over 75% of the company’s business comes from rural customers. We are well established to service our rural clients from three locations (Chatham, Alvinston and Cambridge).